BasketYour basket contains
0 items
Online Shop / Vacuum Brake Equipment / Brake Blocks

7¼” Narrow Gauge & 10¼” Standard Scale Brake Blocks - Set of 4

7¼” Narrow Gauge & 10¼” Standard Scale Brake Blocks - Set of 4
£25.00
(inc VAT)
# PNR-11G/PNR-11H
 
Description

A new addition to the range is a brake block designed to fit the largest 7¼" narrow gauge and 10¼" standard scale models.  These blocks are handed left and right, this is because the hanger position is below centre to allow room for sets of blocks to be fitted to close coupled wheel sets as on Mount Kilimanjaro.

The blocks are injection moulded in a grade of nylon which is filled with glass beads to a level of 40%. These beads are very small and provide the braking medium with the plastic acting as a carrier.

The blocks are supplied ready to fit, only requiring the pin hole to be drilled. The blocks have proved themselves to be very effective at braking and also thoroughly clean wheel treads of dirt and practically any traces of aluminum.

Sold as a set of 4 - 2 left and 2 right hand

Kit Contents
4 - Brake Blocks (Undrilled)
 Installation Instructions
• Place brake block on wheel tread in approximate running position (making sure angle on block 
  matches angle on wheel).
• Position hanger in required position and mark where holes are required in blocks.
• Drill holes through blocks where required, and fit.
• Rough Dimensions: Length - 85.50mm, Width - 22mm with a 5.50mm opening. 


pnr-11g-pnr-11h.jpg
Additional Images
Click product image below to enlarge:

PNR-11G - 7¼ Narrow Gauge & 10¼ Standard Scale Brake Blocks